multiple sever starting error

8 posts / 0 new
Last post
xinyu
xinyu's picture
Offline
Last seen: 17 hours 17 min ago
Joined: Jul 1 2014
Junior Boarder

Posts: 13

xinyu zhou
multiple sever starting error
I have experienced starting error at the end of the postconfigure.  I have collected some info and list here. Hope this will help to single out the problem.
 
Would you like to startup the InfiniDB System? [y,n] (y) > 

----- Starting InfiniDB on 'um1' -----

InfiniDB successfully started

----- Starting InfiniDB on 'pm2' -----

InfiniDB successfully started

----- Starting InfiniDB on local server -----

InfiniDB successfully started

InfiniDB Database Platform Starting, please wait ......... FAILED
 
System and Module statuses
 
Component     Status                       Last Status Change
------------  --------------------------   ------------------------
System        FAILED                       Wed Jul  2 01:09:30 2014
 
Module um1    ACTIVE                       Wed Jul  2 01:08:48 2014
Module pm1    FAILED                       Wed Jul  2 01:09:27 2014
Module pm2    ACTIVE                       Wed Jul  2 01:09:10 2014
 
 /var/log/Calpont/crit.log
Jul  1 17:06:08 p-beyond02-sta-1b joblist[26490]: 08.062904 |0|0|0| C 05 CAL0000: distributedenginecomm.cpp @ 368 DEC: lost connection to 127.0.0.1
Jul  1 17:06:08 p-beyond02-sta-1b joblist[26460]: 08.063054 |0|0|0| C 05 CAL0000: distributedenginecomm.cpp @ 368 DEC: lost connection to 127.0.0.1
Jul  1 17:06:08 p-beyond02-sta-1b joblist[26381]: 08.065076 |0|0|0| C 05 CAL0000: distributedenginecomm.cpp @ 368 DEC: lost connection to 127.0.0.1
Jul  1 22:17:03 p-beyond02-sta-1b ProcessManager[6063]: 03.257916 |0|0|0| C 17 CAL0000: startMgrProcessThread Exit with a failure, not all ProcMons ACTIVE
Jul  1 22:43:18 p-beyond02-sta-1b ProcessMonitor[8860]: 18.926086 |0|0|0| C 18 CAL0000: Standby PM not responding, infinidb shutting down
Jul  1 22:50:01 p-beyond02-sta-1b writeengineserver[9876]: 01.519427 |0|0|0| C 32 CAL0000: WriteEngineServer : Exception caught on accept(): CompressedInetStreamSocket::accept sync: Connection reset by pee
r
Jul  2 00:51:13 p-beyond02-sta-1b workernode[9676]: 13.101780 |0|0|0| C 30 CAL0000: An error occurred: CompressedInetStreamSocket::accept sync: Connection reset by peer
Jul  2 00:52:10 p-beyond02-sta-1b joblist[18414]: 10.368010 |0|0|0| C 05 CAL0000: clientrotator.cpp @ 318 Could not get a ExeMgr connection.
Jul  2 00:52:10 p-beyond02-sta-1b DMLProc[18414]: 10.368919 |0|0|0| C 20 CAL0002: DMLProc failed to start due to : clientrotator.cpp: Could not get a connection to a ExeMgr
Jul  2 00:52:10 p-beyond02-sta-1b ProcessMonitor[17711]: 10.949656 |0|0|0| C 18 CAL0000: *****Calpont Process Restarting: DMLProc, old PID = 18414
Jul  2 00:52:16 p-beyond02-sta-1b joblist[18455]: 16.249294 |0|0|0| C 05 CAL0000: clientrotator.cpp @ 318 Could not get a ExeMgr connection.
Jul  2 00:52:16 p-beyond02-sta-1b DMLProc[18455]: 16.250078 |0|0|0| C 20 CAL0002: DMLProc failed to start due to : clientrotator.cpp: Could not get a connection to a ExeMgr
Jul  2 00:52:16 p-beyond02-sta-1b ProcessMonitor[17711]: 16.255495 |0|0|0| C 18 CAL0000: *****Calpont Process Restarting: DMLProc, old PID = 18455
Jul  2 00:52:23 p-beyond02-sta-1b joblist[18495]: 23.551381 |0|0|0| C 05 CAL0000: clientrotator.cpp @ 318 Could not get a ExeMgr connection.
Jul  2 00:52:24 p-beyond02-sta-1b DMLProc[18495]: 24.488270 |0|0|0| C 20 CAL0002: DMLProc failed to start due to : clientrotator.cpp: Could not get a connection to a ExeMgr
Jul  2 00:52:24 p-beyond02-sta-1b ProcessMonitor[17711]: 24.493897 |0|0|0| C 18 CAL0000: *****Calpont Process Restarting: DMLProc, old PID = 18495
Jul  2 00:52:31 p-beyond02-sta-1b joblist[18540]: 31.049453 |0|0|0| C 05 CAL0000: clientrotator.cpp @ 318 Could not get a ExeMgr connection.
Jul  2 00:52:31 p-beyond02-sta-1b DMLProc[18540]: 31.050300 |0|0|0| C 20 CAL0002: DMLProc failed to start due to : clientrotator.cpp: Could not get a connection to a ExeMgr
Jul  2 00:52:31 p-beyond02-sta-1b ProcessMonitor[17711]: 31.055876 |0|0|0| C 18 CAL0000: *****Calpont Process Restarting: DMLProc, old PID = 18540
Jul  2 00:52:37 p-beyond02-sta-1b joblist[18576]: 37.282204 |0|0|0| C 05 CAL0000: clientrotator.cpp @ 318 Could not get a ExeMgr connection.
Jul  2 00:52:40 p-beyond02-sta-1b DMLProc[18576]: 40.398043 |0|0|0| C 20 CAL0002: DMLProc failed to start due to : clientrotator.cpp: Could not get a connection to a ExeMgr
Jul  2 00:56:31 p-beyond02-sta-1b joblist[18380]: 31.093520 |0|0|0| C 05 CAL0000: distributedenginecomm.cpp @ 368 DEC: lost connection to 10.129.11.55
Jul  2 00:56:31 p-beyond02-sta-1b joblist[18271]: 31.103608 |0|0|0| C 05 CAL0000: distributedenginecomm.cpp @ 368 DEC: lost connection to 10.129.11.55
Jul  2 00:56:59 p-beyond02-sta-1b joblist[19457]: 59.879114 |0|0|0| C 05 CAL0000: clientrotator.cpp @ 318 Could not get a ExeMgr connection.
Jul  2 00:57:00 p-beyond02-sta-1b DMLProc[19457]: 00.751135 |0|0|0| C 20 CAL0002: DMLProc failed to start due to : clientrotator.cpp: Could not get a connection to a ExeMgr
Jul  2 00:57:01 p-beyond02-sta-1b ProcessMonitor[18966]: 01.703436 |0|0|0| C 18 CAL0000: *****Calpont Process Restarting: DMLProc, old PID = 19457
Jul  2 00:57:01 p-beyond02-sta-1b ProcessManager[19023]: 01.789771 |0|0|0| C 17 CAL0000: startSystemThread: Module failed, Set System State to FAILED: pm1
Jul  2 00:57:01 p-beyond02-sta-1b ProcessManager[19023]: 01.791325 |0|0|0| C 17 CAL0000: startMgrProcessThread Exit with a failure, error returned from startSystemThread
Jul  2 00:57:07 p-beyond02-sta-1b joblist[19509]: 07.088271 |0|0|0| C 05 CAL0000: clientrotator.cpp @ 318 Could not get a ExeMgr connection.
Jul  2 00:57:07 p-beyond02-sta-1b DMLProc[19509]: 07.964731 |0|0|0| C 20 CAL0002: DMLProc failed to start due to : clientrotator.cpp: Could not get a connection to a ExeMgr
Jul  2 00:57:07 p-beyond02-sta-1b ProcessMonitor[18966]: 07.971082 |0|0|0| C 18 CAL0000: *****Calpont Process Restarting: DMLProc, old PID = 19509
Jul  2 00:57:15 p-beyond02-sta-1b joblist[19545]: 15.292387 |0|0|0| C 05 CAL0000: clientrotator.cpp @ 318 Could not get a ExeMgr connection.
Jul  2 00:57:16 p-beyond02-sta-1b DMLProc[19545]: 16.206591 |0|0|0| C 20 CAL0002: DMLProc failed to start due to : clientrotator.cpp: Could not get a connection to a ExeMgr
Jul  2 01:08:48 p-beyond02-sta-1b joblist[19432]: 48.587912 |0|0|0| C 05 CAL0000: distributedenginecomm.cpp @ 368 DEC: lost connection to 10.129.11.55
Jul  2 01:08:48 p-beyond02-sta-1b joblist[19323]: 48.588429 |0|0|0| C 05 CAL0000: distributedenginecomm.cpp @ 368 DEC: lost connection to 10.129.11.55
Jul  2 01:08:57 p-beyond02-sta-1b joblist[19432]: 57.351020 |0|0|0| C 05 CAL0000: distributedenginecomm.cpp @ 368 DEC: lost connection to 10.129.12.55
Jul  2 01:08:57 p-beyond02-sta-1b joblist[19323]: 57.358294 |0|0|0| C 05 CAL0000: distributedenginecomm.cpp @ 368 DEC: lost connection to 10.129.12.55
Jul  2 01:09:26 p-beyond02-sta-1b joblist[23004]: 26.384959 |0|0|0| C 05 CAL0000: clientrotator.cpp @ 318 Could not get a ExeMgr connection.
Jul  2 01:09:26 p-beyond02-sta-1b DMLProc[23004]: 26.385723 |0|0|0| C 20 CAL0002: DMLProc failed to start due to : clientrotator.cpp: Could not get a connection to a ExeMgr
Jul  2 01:09:30 p-beyond02-sta-1b ProcessManager[22359]: 30.966555 |0|0|0| C 17 CAL0000: startSystemThread: Module failed, Set System State to FAILED: pm1
Jul  2 01:09:30 p-beyond02-sta-1b ProcessManager[22359]: 30.967576 |0|0|0| C 17 CAL0000: startMgrProcessThread Exit with a failure, error returned from startSystemThread
Jul  2 04:55:23 p-beyond02-sta-1b joblist[22863]: 23.004875 |0|0|0| C 05 CAL0000: distributedenginecomm.cpp @ 368 DEC: lost connection to 10.129.12.55
Jul  2 04:55:23 p-beyond02-sta-1b joblist[22974]: 23.005882 |0|0|0| C 05 CAL0000: distributedenginecomm.cpp @ 368 DEC: lost connection to 10.129.12.55
Jul  2 04:56:42 p-beyond02-sta-1b joblist[10057]: 42.769137 |0|0|0| C 05 CAL0000: clientrotator.cpp @ 318 Could not get a ExeMgr connection.
Jul  2 04:56:42 p-beyond02-sta-1b DMLProc[10057]: 42.769977 |0|0|0| C 20 CAL0002: DMLProc failed to start due to : clientrotator.cpp: Could not get a connection to a ExeMgr
Jul  2 04:56:43 p-beyond02-sta-1b ProcessMonitor[22299]: 43.130794 |0|0|0| C 18 CAL0000: *****Calpont Process Restarting: DMLProc, old PID = 10057
Jul  2 04:56:50 p-beyond02-sta-1b joblist[10097]: 50.454824 |0|0|0| C 05 CAL0000: clientrotator.cpp @ 318 Could not get a ExeMgr connection.
Jul  2 04:56:51 p-beyond02-sta-1b DMLProc[10097]: 51.369136 |0|0|0| C 20 CAL0002: DMLProc failed to start due to : clientrotator.cpp: Could not get a connection to a ExeMgr
Jul  2 04:56:51 p-beyond02-sta-1b ProcessMonitor[22299]: 51.374771 |0|0|0| C 18 CAL0000: *****Calpont Process Restarting: DMLProc, old PID = 10097
Jul  2 04:56:57 p-beyond02-sta-1b joblist[10139]: 57.668781 |0|0|0| C 05 CAL0000: clientrotator.cpp @ 318 Could not get a ExeMgr connection.
Jul  2 04:56:58 p-beyond02-sta-1b DMLProc[10139]: 58.607669 |0|0|0| C 20 CAL0002: DMLProc failed to start due to : clientrotator.cpp: Could not get a connection to a ExeMgr
Jul  2 04:56:58 p-beyond02-sta-1b ProcessMonitor[22299]: 58.615825 |0|0|0| C 18 CAL0000: *****Calpont Process Restarting: DMLProc, old PID = 10139
Jul  2 04:57:03 p-beyond02-sta-1b joblist[10191]: 03.248869 |0|0|0| C 05 CAL0000: clientrotator.cpp @ 318 Could not get a ExeMgr connection.
Jul  2 04:57:04 p-beyond02-sta-1b DMLProc[10191]: 04.241157 |0|0|0| C 20 CAL0002: DMLProc failed to start due to : clientrotator.cpp: Could not get a connection to a ExeMgr
Jul  2 04:57:04 p-beyond02-sta-1b ProcessMonitor[22299]: 04.246790 |0|0|0| C 18 CAL0000: *****Calpont Process Restarting: DMLProc, old PID = 10191
Jul  2 04:57:11 p-beyond02-sta-1b joblist[10226]: 11.883072 |0|0|0| C 05 CAL0000: clientrotator.cpp @ 318 Could not get a ExeMgr connection.
Jul  2 04:57:13 p-beyond02-sta-1b DMLProc[10226]: 13.990124 |0|0|0| C 20 CAL0002: DMLProc failed to start due to : clientrotator.cpp: Could not get a connection to a ExeMgr
 
xinyu
xinyu's picture
Offline
Last seen: 17 hours 17 min ago
Joined: Jul 1 2014
Junior Boarder

Posts: 13

xinyu zhou
Here is the calpont.xml file
<?xml version="1.0" encoding="UTF-8"?>
 
<!-- $Id: Calpont.xml 1286 2009-03-30 22:39:41Z dcathey $ -->
 
-<Calpont Version="V1.0.0">
 
 
-<ExeMgr1>
 
<IPAddr>10.129.10.50</IPAddr>
 
<Port>8601</Port>
 
<Module>um1</Module>
 
</ExeMgr1>
 
 
-<JobProc>
 
<IPAddr>0.0.0.0</IPAddr>
 
<Port>8602</Port>
 
</JobProc>
 
 
-<ProcMgr>
 
<IPAddr>10.129.11.55</IPAddr>
 
<Port>8603</Port>
 
</ProcMgr>
 
 
-<ProcStatusControl>
 
<IPAddr>10.129.11.55</IPAddr>
 
<Port>8604</Port>
 
</ProcStatusControl>
 
 
-<ProcStatusControlStandby>
 
<IPAddr>10.129.12.55</IPAddr>
 
<Port>8605</Port>
 
</ProcStatusControlStandby>
 
 
-<localhost_ProcessMonitor>
 
<IPAddr>127.0.0.1</IPAddr>
 
<Port>8800</Port>
 
</localhost_ProcessMonitor>
 
 
-<dm1_ProcessMonitor>
 
<IPAddr>0.0.0.0</IPAddr>
 
<Port>8800</Port>
 
</dm1_ProcessMonitor>
 
 
-<um1_ProcessMonitor>
 
<IPAddr>10.129.10.50</IPAddr>
 
<Port>8800</Port>
 
</um1_ProcessMonitor>
 
 
-<pm1_ProcessMonitor>
 
<IPAddr>10.129.11.55</IPAddr>
 
<Port>8800</Port>
 
</pm1_ProcessMonitor>
 
 
-<dm1_ServerMonitor>
 
<IPAddr>0.0.0.0</IPAddr>
 
<Port>8622</Port>
 
</dm1_ServerMonitor>
 
 
-<um1_ServerMonitor>
 
<IPAddr>10.129.10.50</IPAddr>
 
<Port>8622</Port>
 
</um1_ServerMonitor>
 
 
-<pm1_ServerMonitor>
 
<IPAddr>10.129.11.55</IPAddr>
 
<Port>8622</Port>
 
</pm1_ServerMonitor>
 
 
-<pm1_WriteEngineServer>
 
<IPAddr>10.129.11.55</IPAddr>
 
<Port>8630</Port>
 
</pm1_WriteEngineServer>
 
 
-<DDLProc>
 
<IPAddr>10.129.10.50</IPAddr>
 
<Port>8612</Port>
 
</DDLProc>
 
 
-<DMLProc>
 
<IPAddr>10.129.10.50</IPAddr>
 
<Port>8614</Port>
 
</DMLProc>
 
 
-<BatchInsert>
 
<RowsPerBatch>10000</RowsPerBatch>
 
</BatchInsert>
 
 
-<PrimitiveServers>
 
<Count>2</Count>
 
<ConnectionsPerPrimProc>2</ConnectionsPerPrimProc>
 
<ProcessorThreshold>128</ProcessorThreshold>
 
<!-- <ProcessorThreads>16</ProcessorThreads> -->
 
 
<!-- defaults to num cores * 2 -->
 
 
<ProcessorQueueSize>10K</ProcessorQueueSize>
 
<!-- minimum of extent size 8192 -->
 
 
<DebugLevel>0</DebugLevel>
 
<LBID_Shift>13</LBID_Shift>
 
<ColScanBufferSizeBlocks>512</ColScanBufferSizeBlocks>
 
<ColScanReadAheadBlocks>512</ColScanReadAheadBlocks>
 
<!-- s/b factor of extent size 8192 -->
 
 
<!-- <BPPCount>16</BPPCount> -->
 
 
<!-- Default num cores * 2. A cap on the number of simultaneous primitives per jobstep -->
 
 
<PrefetchThreshold>1</PrefetchThreshold>
 
<PTTrace>0</PTTrace>
 
<RotatingDestination>n</RotatingDestination>
 
<!-- <HighPriorityPercentage>60</HighPriorityPercentage> -->
 
 
<!-- <MediumPriorityPercentage>30</MediumPriorityPercentage> -->
 
 
<!-- <LowPriorityPercentage>10</LowPriorityPercentage> -->
 
 
<AggregationMemoryCheck>95</AggregationMemoryCheck>
 
<DirectIO>y</DirectIO>
 
</PrimitiveServers>
 
 
-<PMS1>
 
<IPAddr>10.129.11.55</IPAddr>
 
<Port>8620</Port>
 
</PMS1>
 
 
-<PMS2>
 
<IPAddr>10.129.12.55</IPAddr>
 
<Port>8620</Port>
 
</PMS2>
 
 
-<PMS3>
 
<IPAddr>10.129.11.55</IPAddr>
 
<Port>8620</Port>
 
</PMS3>
 
 
-<PMS4>
 
<IPAddr>10.129.12.55</IPAddr>
 
<Port>8620</Port>
 
</PMS4>
 
 
-<PMS5>
 
<IPAddr>10.129.11.55</IPAddr>
 
<Port>8620</Port>
 
</PMS5>
 
 
-<PMS6>
 
<IPAddr>10.129.12.55</IPAddr>
 
<Port>8620</Port>
 
</PMS6>
 
 
-<PMS7>
 
<IPAddr>10.129.11.55</IPAddr>
 
<Port>8620</Port>
 
</PMS7>
 
 
-<PMS8>
 
<IPAddr>10.129.12.55</IPAddr>
 
<Port>8620</Port>
 
</PMS8>
 
 
-<PMS9>
 
<IPAddr>10.129.11.55</IPAddr>
 
<Port>8620</Port>
 
</PMS9>
 
 
-<PMS10>
 
<IPAddr>10.129.12.55</IPAddr>
 
<Port>8620</Port>
 
</PMS10>
 
 
-<PMS11>
 
<IPAddr>10.129.11.55</IPAddr>
 
<Port>8620</Port>
 
</PMS11>
 
 
-<PMS12>
 
<IPAddr>10.129.12.55</IPAddr>
 
<Port>8620</Port>
 
</PMS12>
 
 
-<PMS13>
 
<IPAddr>10.129.11.55</IPAddr>
 
<Port>8620</Port>
 
</PMS13>
 
 
-<PMS14>
 
<IPAddr>10.129.12.55</IPAddr>
 
<Port>8620</Port>
 
</PMS14>
 
 
-<PMS15>
 
<IPAddr>10.129.11.55</IPAddr>
 
<Port>8620</Port>
 
</PMS15>
 
 
-<PMS16>
 
<IPAddr>10.129.12.55</IPAddr>
 
<Port>8620</Port>
 
</PMS16>
 
 
-<PMS17>
 
<IPAddr>10.129.11.55</IPAddr>
 
<Port>8620</Port>
 
</PMS17>
 
 
-<PMS18>
 
<IPAddr>10.129.12.55</IPAddr>
 
<Port>8620</Port>
 
</PMS18>
 
 
-<PMS19>
 
<IPAddr>10.129.11.55</IPAddr>
 
<Port>8620</Port>
 
</PMS19>
 
 
-<PMS20>
 
<IPAddr>10.129.12.55</IPAddr>
 
<Port>8620</Port>
 
</PMS20>
 
 
-<PMS21>
 
<IPAddr>10.129.11.55</IPAddr>
 
<Port>8620</Port>
 
</PMS21>
 
 
-<PMS22>
 
<IPAddr>10.129.12.55</IPAddr>
 
<Port>8620</Port>
 
</PMS22>
 
 
-<PMS23>
 
<IPAddr>10.129.11.55</IPAddr>
 
<Port>8620</Port>
 
</PMS23>
 
 
-<PMS24>
 
<IPAddr>10.129.12.55</IPAddr>
 
<Port>8620</Port>
 
</PMS24>
 
 
-<PMS25>
 
<IPAddr>10.129.11.55</IPAddr>
 
<Port>8620</Port>
 
</PMS25>
 
 
-<PMS26>
 
<IPAddr>10.129.12.55</IPAddr>
 
<Port>8620</Port>
 
</PMS26>
 
 
-<PMS27>
 
<IPAddr>10.129.11.55</IPAddr>
 
<Port>8620</Port>
 
</PMS27>
 
 
-<PMS28>
 
<IPAddr>10.129.12.55</IPAddr>
 
<Port>8620</Port>
 
</PMS28>
 
 
-<PMS29>
 
<IPAddr>10.129.11.55</IPAddr>
 
<Port>8620</Port>
 
</PMS29>
 
 
-<PMS30>
 
<IPAddr>10.129.12.55</IPAddr>
 
<Port>8620</Port>
 
</PMS30>
 
 
-<PMS31>
 
<IPAddr>10.129.11.55</IPAddr>
 
<Port>8620</Port>
 
</PMS31>
 
 
-<PMS32>
 
<IPAddr>10.129.12.55</IPAddr>
 
<Port>8620</Port>
 
</PMS32>
 
 
-<SystemConfig>
 
<SystemLang>C</SystemLang>
 
<SystemName>dataflow1</SystemName>
 
<ParentOAMModuleName>pm1</ParentOAMModuleName>
 
<StandbyOAMModuleName>pm2</StandbyOAMModuleName>
 
<!-- Disabled <ProcessHeartbeatPeriod>-1</ProcessHeartbeatPeriod> -->
 
 
<!-- Warning: Do not change this value once database is built -->
 
 
<DBRootCount>4</DBRootCount>
 
<DBRoot1>/usr/local/Calpont/data1</DBRoot1>
 
<DBRMRoot>$INSTALLDIR/data1/systemFiles/dbrm/BRM_saves</DBRMRoot>
 
<TableLockSaveFile>$INSTALLDIR/data1/systemFiles/dbrm/tablelocks</TableLockSaveFile>
 
<DBRMTimeOut>20</DBRMTimeOut>
 
<!-- in seconds -->
 
 
<DBRMSnapshotInterval>100000</DBRMSnapshotInterval>
 
<ExternalCriticalThreshold>90</ExternalCriticalThreshold>
 
<ExternalMajorThreshold>80</ExternalMajorThreshold>
 
<ExternalMinorThreshold>70</ExternalMinorThreshold>
 
<TempDiskPath>/tmp</TempDiskPath>
 
<WorkingDir>/tmp</WorkingDir>
 
<TransactionArchivePeriod>10</TransactionArchivePeriod>
 
<NMSIPAddress>0.0.0.0</NMSIPAddress>
 
<TempSaveSize>128M</TempSaveSize>
 
<!-- default SWSDL max element save size -->
 
 
<WaitPeriod>10</WaitPeriod>
 
<!-- in seconds -->
 
 
<TempFileDir>/tmp/infinidb_tmp_files</TempFileDir>
 
<CalpontHome>$INSTALLDIR</CalpontHome>
 
<ModuleHeartbeatPeriod>10</ModuleHeartbeatPeriod>
 
<ModuleHeartbeatCount>3</ModuleHeartbeatCount>
 
<ProcessRestartCount>10</ProcessRestartCount>
 
<ProcessRestartPeriod>120</ProcessRestartPeriod>
 
<SwapAction>restartSystem</SwapAction>
 
<!-- OAM command (or 'none') to run when swap space exceeds Major Threshold -->
 
 
<ActivePmFailoverDisabled>n</ActivePmFailoverDisabled>
 
<MemoryCheckPercent>95</MemoryCheckPercent>
 
<!-- Max real memory to limit growth of buffers to -->
 
 
<DataFileLog>OFF</DataFileLog>
 
<!-- enable if you want to limit how much memory may be used for hdfs read/write memory buffers. <hdfsRdwrBufferMaxSize>8G</hdfsRdwrBufferMaxSize> -->
 
 
<hdfsRdwrScratch>/tmp/rdwrscratch</hdfsRdwrScratch>
 
<!-- Do not set to an hdfs file path -->
 
 
<DataFilePlugin/>
 
<DataFileEnvFile/>
 
<PrimaryUMModuleName>pm1</PrimaryUMModuleName>
 
<DBRoot2>/usr/local/Calpont/data2</DBRoot2>
 
<DBRoot3>/usr/local/Calpont/data3</DBRoot3>
 
<DBRoot4>/usr/local/Calpont/data4</DBRoot4>
 
</SystemConfig>
 
 
-<SystemModuleConfig>
 
<ModuleType1>dm</ModuleType1>
 
<ModuleDesc1>Director Module</ModuleDesc1>
 
<RunType1>SIMPLEX</RunType1>
 
<ModuleCount1>0</ModuleCount1>
 
<ModuleIPAddr1-1-1>0.0.0.0</ModuleIPAddr1-1-1>
 
<ModuleHostName1-1-1>unassigned</ModuleHostName1-1-1>
 
<ModuleDisableState1-1>ENABLED</ModuleDisableState1-1>
 
<ModuleCPUCriticalThreshold1>0</ModuleCPUCriticalThreshold1>
 
<ModuleCPUMajorThreshold1>0</ModuleCPUMajorThreshold1>
 
<ModuleCPUMinorThreshold1>0</ModuleCPUMinorThreshold1>
 
<ModuleCPUMinorClearThreshold1>0</ModuleCPUMinorClearThreshold1>
 
<ModuleDiskCriticalThreshold1>90</ModuleDiskCriticalThreshold1>
 
<ModuleDiskMajorThreshold1>80</ModuleDiskMajorThreshold1>
 
<ModuleDiskMinorThreshold1>70</ModuleDiskMinorThreshold1>
 
<ModuleMemCriticalThreshold1>90</ModuleMemCriticalThreshold1>
 
<ModuleMemMajorThreshold1>0</ModuleMemMajorThreshold1>
 
<ModuleMemMinorThreshold1>0</ModuleMemMinorThreshold1>
 
<ModuleSwapCriticalThreshold1>90</ModuleSwapCriticalThreshold1>
 
<ModuleSwapMajorThreshold1>80</ModuleSwapMajorThreshold1>
 
<ModuleSwapMinorThreshold1>70</ModuleSwapMinorThreshold1>
 
<ModuleDiskMonitorFileSystem1-1>/</ModuleDiskMonitorFileSystem1-1>
 
<ModuleDBRootCount1-1>unassigned</ModuleDBRootCount1-1>
 
<ModuleDBRootID1-1-1>unassigned</ModuleDBRootID1-1-1>
 
<ModuleType2>um</ModuleType2>
 
<ModuleDesc2>User Module</ModuleDesc2>
 
<RunType2>SIMPLEX</RunType2>
 
<ModuleCount2>1</ModuleCount2>
 
<ModuleIPAddr1-1-2>10.129.10.50</ModuleIPAddr1-1-2>
 
<ModuleHostName1-1-2>p-beyond01-sta.use01.plat.priv</ModuleHostName1-1-2>
 
<ModuleDisableState1-2>ENABLED</ModuleDisableState1-2>
 
<ModuleCPUCriticalThreshold2>0</ModuleCPUCriticalThreshold2>
 
<ModuleCPUMajorThreshold2>0</ModuleCPUMajorThreshold2>
 
<ModuleCPUMinorThreshold2>0</ModuleCPUMinorThreshold2>
 
<ModuleCPUMinorClearThreshold2>0</ModuleCPUMinorClearThreshold2>
 
<ModuleDiskCriticalThreshold2>90</ModuleDiskCriticalThreshold2>
 
<ModuleDiskMajorThreshold2>80</ModuleDiskMajorThreshold2>
 
<ModuleDiskMinorThreshold2>70</ModuleDiskMinorThreshold2>
 
<ModuleMemCriticalThreshold2>90</ModuleMemCriticalThreshold2>
 
<ModuleMemMajorThreshold2>0</ModuleMemMajorThreshold2>
 
<ModuleMemMinorThreshold2>0</ModuleMemMinorThreshold2>
 
<ModuleSwapCriticalThreshold2>90</ModuleSwapCriticalThreshold2>
 
<ModuleSwapMajorThreshold2>80</ModuleSwapMajorThreshold2>
 
<ModuleSwapMinorThreshold2>70</ModuleSwapMinorThreshold2>
 
<ModuleDiskMonitorFileSystem1-2>/</ModuleDiskMonitorFileSystem1-2>
 
<ModuleDBRootCount1-2>unassigned</ModuleDBRootCount1-2>
 
<ModuleDBRootID1-1-2>unassigned</ModuleDBRootID1-1-2>
 
<ModuleType3>pm</ModuleType3>
 
<ModuleDesc3>Performance Module</ModuleDesc3>
 
<RunType3>SIMPLEX</RunType3>
 
<ModuleCount3>2</ModuleCount3>
 
<ModuleIPAddr1-1-3>10.129.11.55</ModuleIPAddr1-1-3>
 
<ModuleHostName1-1-3>p-beyond02-sta.use01.plat.priv</ModuleHostName1-1-3>
 
<ModuleDisableState1-3>ENABLED</ModuleDisableState1-3>
 
<ModuleCPUCriticalThreshold3>0</ModuleCPUCriticalThreshold3>
 
<ModuleCPUMajorThreshold3>0</ModuleCPUMajorThreshold3>
 
<ModuleCPUMinorThreshold3>0</ModuleCPUMinorThreshold3>
 
<ModuleCPUMinorClearThreshold3>0</ModuleCPUMinorClearThreshold3>
 
<ModuleDiskCriticalThreshold3>90</ModuleDiskCriticalThreshold3>
 
<ModuleDiskMajorThreshold3>80</ModuleDiskMajorThreshold3>
 
<ModuleDiskMinorThreshold3>70</ModuleDiskMinorThreshold3>
 
<ModuleMemCriticalThreshold3>90</ModuleMemCriticalThreshold3>
 
<ModuleMemMajorThreshold3>0</ModuleMemMajorThreshold3>
 
<ModuleMemMinorThreshold3>0</ModuleMemMinorThreshold3>
 
<ModuleSwapCriticalThreshold3>90</ModuleSwapCriticalThreshold3>
 
<ModuleSwapMajorThreshold3>80</ModuleSwapMajorThreshold3>
 
<ModuleSwapMinorThreshold3>70</ModuleSwapMinorThreshold3>
 
<ModuleDiskMonitorFileSystem1-3>/</ModuleDiskMonitorFileSystem1-3>
 
<ModuleDBRootCount1-3>2</ModuleDBRootCount1-3>
 
<ModuleDBRootID1-1-3>1</ModuleDBRootID1-1-3>
 
<ModuleHostName1-2-2>unassigned</ModuleHostName1-2-2>
 
<ModuleIPAddr1-2-2>0.0.0.0</ModuleIPAddr1-2-2>
 
<ModuleHostName1-3-2>p-beyond03-sta.use01.plat.priv</ModuleHostName1-3-2>
 
<ModuleIPAddr1-3-2>10.129.12.55</ModuleIPAddr1-3-2>
 
<ModuleHostName1-4-2>p-beyond04-sta.use01.plat.priv</ModuleHostName1-4-2>
 
<ModuleIPAddr1-4-2>10.129.10.51</ModuleIPAddr1-4-2>
 
<ModuleHostName1-2-3>unassigned</ModuleHostName1-2-3>
 
<ModuleIPAddr1-2-3>0.0.0.0</ModuleIPAddr1-2-3>
 
<ModuleHostName1-3-3>unassigned</ModuleHostName1-3-3>
 
<ModuleIPAddr1-3-3>0.0.0.0</ModuleIPAddr1-3-3>
 
<ModuleDBRootID1-2-3>2</ModuleDBRootID1-2-3>
 
<ModuleDisableState2-3>ENABLED</ModuleDisableState2-3>
 
<ModuleHostName2-1-3>p-beyond03-sta.use01.plat.priv</ModuleHostName2-1-3>
 
<ModuleIPAddr2-1-3>10.129.12.55</ModuleIPAddr2-1-3>
 
<ModuleHostName2-2-3>unassigned</ModuleHostName2-2-3>
 
<ModuleIPAddr2-2-3>0.0.0.0</ModuleIPAddr2-2-3>
 
<ModuleDBRootID2-1-3>3</ModuleDBRootID2-1-3>
 
<ModuleDBRootID2-2-3>4</ModuleDBRootID2-2-3>
 
<ModuleDBRootCount2-3>2</ModuleDBRootCount2-3>
 
</SystemModuleConfig>
 
 
-<SystemExtDeviceConfig>
 
<Count>0</Count>
 
<Name1>unassigned</Name1>
 
<IPAddr1>0.0.0.0</IPAddr1>
 
<DisableState1>ENABLED</DisableState1>
 
</SystemExtDeviceConfig>
 
 
-<SessionManager>
 
<MaxConcurrentTransactions>1000</MaxConcurrentTransactions>
 
<SharedMemoryTmpFile>$INSTALLDIR/data1/systemFiles/dbrm/CalpontShm</SharedMemoryTmpFile>
 
<TxnIDFile>$INSTALLDIR/data1/systemFiles/dbrm/SMTxnID</TxnIDFile>
 
</SessionManager>
 
 
-<SessionMonitor>
 
<SharedMemoryTmpFile>$INSTALLDIR/data1/systemFiles/dbrm/CalpontSessionMonitorShm</SharedMemoryTmpFile>
 
<TransactionAgeLimit>10</TransactionAgeLimit>
 
</SessionMonitor>
 
 
-<VersionBuffer>
 
<!-- VersionBufferFileSize must be a multiple of 8192. One version buffer file will be put on each DB root. -->
 
 
<VersionBufferFileSize>1GB</VersionBufferFileSize>
 
</VersionBuffer>
 
 
-<OIDManager>
 
<!-- XXXPAT: This is located in tmp so we all have R/W access. It should be relocated to $INSTALLDIR/share/oidbitmap on the production machine-->
 
 
<!-- Do not change this file after database built -->
 
 
<OIDBitmapFile>$INSTALLDIR/data1/systemFiles/dbrm/oidbitmap</OIDBitmapFile>
 
<!-- Do not change this value after database built -->
 
 
<FirstOID>3000</FirstOID>
 
</OIDManager>
 
 
-<WriteEngine>
 
<BulkRoot>$INSTALLDIR/data/bulk</BulkRoot>
 
<BulkRollbackDir>$INSTALLDIR/data/bulk/rollback</BulkRollbackDir>
 
<MaxFileSystemDiskUsagePct>98</MaxFileSystemDiskUsagePct>
 
<CompressedPaddingBlocks>1</CompressedPaddingBlocks>
 
<!-- Number of blocks used to pad compressed chunks -->
 
 
</WriteEngine>
 
 
-<DBRM_Controller>
 
<NumWorkers>3</NumWorkers>
 
<IPAddr>10.129.11.55</IPAddr>
 
<Port>8616</Port>
 
</DBRM_Controller>
 
<!-- Worker Port: 8700 - 8720 is reserved to support External Modules-->
 
 
 
-<DBRM_Worker1>
 
<IPAddr>10.129.11.55</IPAddr>
 
<Port>8700</Port>
 
<Module>pm1</Module>
 
</DBRM_Worker1>
 
 
-<DBRM_Worker2>
 
<IPAddr>10.129.10.50</IPAddr>
 
<Port>8700</Port>
 
<Module>um1</Module>
 
</DBRM_Worker2>
 
 
-<DBRM_Worker3>
 
<IPAddr>10.129.12.55</IPAddr>
 
<Port>8700</Port>
 
<Module>pm2</Module>
 
</DBRM_Worker3>
 
 
-<DBRM_Worker4>
 
<IPAddr>0.0.0.0</IPAddr>
 
<Port>8700</Port>
 
<Module>unassigned</Module>
 
</DBRM_Worker4>
 
 
-<DBRM_Worker5>
 
<IPAddr>0.0.0.0</IPAddr>
 
<Port>8700</Port>
 
<Module>unassigned</Module>
 
</DBRM_Worker5>
 
 
-<DBRM_Worker6>
 
<IPAddr>0.0.0.0</IPAddr>
 
<Port>8700</Port>
 
<Module>unassigned</Module>
 
</DBRM_Worker6>
 
 
-<DBRM_Worker7>
 
<IPAddr>0.0.0.0</IPAddr>
 
<Port>8700</Port>
 
<Module>unassigned</Module>
 
</DBRM_Worker7>
 
 
-<DBRM_Worker8>
 
<IPAddr>0.0.0.0</IPAddr>
 
<Port>8700</Port>
 
<Module>unassigned</Module>
 
</DBRM_Worker8>
 
 
-<DBRM_Worker9>
 
<IPAddr>0.0.0.0</IPAddr>
 
<Port>8700</Port>
 
<Module>unassigned</Module>
 
</DBRM_Worker9>
 
 
-<DBRM_Worker10>
 
<IPAddr>0.0.0.0</IPAddr>
 
<Port>8700</Port>
 
<Module>unassigned</Module>
 
</DBRM_Worker10>
 
 
-<DBBC>
 
<!-- The percentage of RAM to use for the disk block cache. Defaults to 86% -->
 
 
<NumBlocksPct>50</NumBlocksPct>
 
<!-- <NumThreads>16</NumThreads> -->
 
 
<!-- 1-256. Default is 16. -->
 
 
<NumCaches>1</NumCaches>
 
<!-- # of parallel caches to instantiate -->
 
 
<IOMTracing>0</IOMTracing>
 
<BRPTracing>0</BRPTracing>
 
<ReportFrequency>65536</ReportFrequency>
 
<MaxOpenFiles>2K</MaxOpenFiles>
 
<DecreaseOpenFilesCount>200</DecreaseOpenFilesCount>
 
<FDCacheTrace>0</FDCacheTrace>
 
</DBBC>
 
 
-<Installation>
 
<SystemStartupOffline>n</SystemStartupOffline>
 
<InitialInstallFlag>y</InitialInstallFlag>
 
<SingleServerInstall>n</SingleServerInstall>
 
<ServerTypeInstall>1</ServerTypeInstall>
 
<PMwithUM>n</PMwithUM>
 
<MySQLRep>n</MySQLRep>
 
<DBRootStorageType>internal</DBRootStorageType>
 
<UMStorageType>internal</UMStorageType>
 
<SystemLogConfigFile>/etc/rsyslog.d/calpont.conf</SystemLogConfigFile>
 
<rpw>unassigned</rpw>
 
<Cloud>unassigned</Cloud>
 
<EEPackageType>rpm</EEPackageType>
 
<EnableSNMP>n</EnableSNMP>
 
<AmazonX509Certificate>unassigned</AmazonX509Certificate>
 
<AmazonX509PrivateKey>unassigned</AmazonX509PrivateKey>
 
<AmazonRegion>us-east-1</AmazonRegion>
 
<AmazonZone>unassigned</AmazonZone>
 
<AmazonSubNetID>unassigned</AmazonSubNetID>
 
<AmazonVPCNextPrivateIP>unassigned</AmazonVPCNextPrivateIP>
 
<PMInstanceType>unassigned</PMInstanceType>
 
<UMInstanceType>unassigned</UMInstanceType>
 
<UMSecurityGroup>unassigned</UMSecurityGroup>
 
<UMVolumeSize>unassigned</UMVolumeSize>
 
<PMVolumeSize>unassigned</PMVolumeSize>
 
<AmazonAutoTagging>n</AmazonAutoTagging>
 
<AmazonElasticIPCount>0</AmazonElasticIPCount>
 
<AmazonElasticIPAddr1>unassigned</AmazonElasticIPAddr1>
 
<AmazonElasticModule1>unassigned</AmazonElasticModule1>
 
<CoreFileFlag>n</CoreFileFlag>
 
<JavaHome>unassigned</JavaHome>
 
<JavaPath>unassigned</JavaPath>
 
<GlusterConfig>n</GlusterConfig>
 
<MySQLPort>3306</MySQLPort>
 
</Installation>
 
 
-<ExtentMap>
 
<!-- WARNING: these can only be changed on an empty system. Once any object has been allocated it cannot be changed!. Valid values for ExtentRows are: 64M, 8M and 1M. The default is 8M. -->
 
 
<FilesPerColumnPartition>4</FilesPerColumnPartition>
 
<!-- should be multiple of DBRootCount -->
 
 
<ExtentsPerSegmentFile>2</ExtentsPerSegmentFile>
 
<BRM_UID>0x0</BRM_UID>
 
</ExtentMap>
 
 
-<HashJoin>
 
<MaxBuckets>128</MaxBuckets>
 
<MaxElems>128K</MaxElems>
 
<!-- 128 buckets * 128K * 16 = 256 MB -->
 
 
<FifoSizeLargeSide>128</FifoSizeLargeSide>
 
<PmMaxMemorySmallSide>64M</PmMaxMemorySmallSide>
 
<!-- divide by 48 to get element count -->
 
 
<TotalUmMemory>50%</TotalUmMemory>
 
<TotalPmUmMemory>10%</TotalPmUmMemory>
 
<CPUniqueLimit>100</CPUniqueLimit>
 
</HashJoin>
 
 
-<JobList>
 
<FlushInterval>16K</FlushInterval>
 
<FifoSize>32</FifoSize>
 
<RequestSize>1</RequestSize>
 
<!-- Number of extents per request, should be less than MaxOutstandingRequests. Otherwise, default value 1 is used. -->
 
 
<!-- ProcessorThreadsPerScan is the number of jobs issued to process each extent. The default is 16. MaxOutstandingRequests is the size of the window of work in terms of extents. A value of 20 means there is 20 extents worth of work for the PMs to process at any given time. ProcessorThreadsPerScan * MaxOutstandingRequests should be at least as many threads are available across all PMs. -->
 
 
<!-- <ProcessorThreadsPerScan>16</ProcessorThreadsPerScan> -->
 
 
<MaxOutstandingRequests>20</MaxOutstandingRequests>
 
</JobList>
 
 
-<TupleWSDL>
 
<MaxSize>1M</MaxSize>
 
<!-- Max size in bytes per bucket -->
 
 
<InitialCapacity>1M</InitialCapacity>
 
<!-- Initial capacity per bucket -->
 
 
<MaxBuckets>512</MaxBuckets>
 
<!-- Number of buckets -->
 
 
</TupleWSDL>
 
 
-<RowAggregation>
 
<!-- <RowAggrThreads>8</RowAggrThreads> -->
 
 
<!-- Default value is number of cores -->
 
 
<!-- <RowAggrBuckets>32</RowAggrBuckets> -->
 
 
<!-- Default value is number of cores * 4 -->
 
 
<!-- <RowAggrRowGroupsPerThread>20</RowAggrRowGroupsPerThread> -->
 
 
<!-- Default value is 20 -->
 
 
</RowAggregation>
 
 
-<CrossEngineSupport>
 
<Host>unassigned</Host>
 
<Port>3306</Port>
 
<User>unassigned</User>
 
<Password/>
 
</CrossEngineSupport>
 
 
-<QueryStats>
 
<Enabled>N</Enabled>
 
</QueryStats>
 
 
-<UserPriority>
 
<Enabled>N</Enabled>
 
</UserPriority>
 
 
-<NetworkCompression>
 
<Enabled>Y</Enabled>
 
</NetworkCompression>
 
 
-<QueryTele>
 
<Host>127.0.0.1</Host>
 
<Port>0</Port>
 
</QueryTele>
 
 
-<pm2_ProcessMonitor>
 
<IPAddr>10.129.12.55</IPAddr>
 
<Port>8800</Port>
 
</pm2_ProcessMonitor>
 
 
-<pm2_ServerMonitor>
 
<IPAddr>10.129.12.55</IPAddr>
 
<Port>8622</Port>
 
</pm2_ServerMonitor>
 
 
-<pm2_WriteEngineServer>
 
<IPAddr>10.129.12.55</IPAddr>
 
<Port>8630</Port>
 
</pm2_WriteEngineServer>
 
</Calpont>
xinyu
xinyu's picture
Offline
Last seen: 17 hours 17 min ago
Joined: Jul 1 2014
Junior Boarder

Posts: 13

xinyu zhou
new error FAILED: Invalid password
This morning I tried to re-install  with root id, but got some new error after the installation. the output for postconfig shows that the error is related to invalid password. I have input the password of the root twice  and it also sucessfully used it to install the package. So, what can be wrong here? Any help will be great. Thanks.
 
 
This is either your password or you can default to using a ssh key
If using a password, the password needs to be the same on all Servers.
 
Enter password, hit 'enter' to default to using a ssh key, or 'exit' >
Confirm password >
 
 
----- Performing Install on 'um1 / p-beyond01-sta.use01.plat.priv' -----
 
Install log file is located here: /tmp/um1_rpm_install.log
 
 
----- Performing Install on 'pm2 / p-beyond03-sta.use01.plat.priv' -----
 
Install log file is located here: /tmp/pm2_rpm_install.log
 
 
InfiniDB Package being installed, please wait ...  DONE
 
===== Checking InfiniDB System Logging Functionality =====
 
The InfiniDB system logging is setup and working on local server
 
InfiniDB System Configuration and Installation is Completed
 
===== Infinidb System Startup =====
 
System Installation is complete. If any part of the install failed,
the problem should be investigated and resolved before continuing.
 
Would you like to startup the InfiniDB System? [y,n] (y) >
 
----- Starting InfiniDB on 'um1' -----
 
           FAILED: Invalid password
Error with running remote_command.sh
 
----- Starting InfiniDB on 'pm2' -----
 
           FAILED: Invalid password
Error with running remote_command.sh
 
----- Starting InfiniDB on local server -----
 
InfiniDB successfully started
 
xinyu
xinyu's picture
Offline
Last seen: 17 hours 17 min ago
Joined: Jul 1 2014
Junior Boarder

Posts: 13

xinyu zhou
Calpont Process statuses
Calpont Process statuses
 
Process             Module    Status            Last Status Change        Process ID
------------------  ------    ---------------   ------------------------  ----------
ProcessMonitor      um1       ACTIVE            Wed Jul  2 17:12:05 2014       22884
ServerMonitor       um1       ACTIVE            Wed Jul  2 17:12:06 2014       23154
DBRMWorkerNode      um1       ACTIVE            Wed Jul  2 17:12:07 2014       23176
 
ProcessMonitor      pm1       ACTIVE            Wed Jul  2 17:12:05 2014       13609
ProcessManager      pm1       ACTIVE            Wed Jul  2 17:12:12 2014       13671
DBRMControllerNode  pm1       ACTIVE            Wed Jul  2 17:12:18 2014       13746
ServerMonitor       pm1       ACTIVE            Wed Jul  2 17:12:24 2014       13775
DBRMWorkerNode      pm1       ACTIVE            Wed Jul  2 17:12:23 2014       13790
DecomSvr            pm1       ACTIVE            Wed Jul  2 17:12:31 2014       13856
PrimProc            pm1       ACTIVE            Wed Jul  2 17:12:36 2014       13873
ExeMgr              pm1       ACTIVE            Wed Jul  2 17:12:41 2014       13984
WriteEngineServer   pm1       ACTIVE            Wed Jul  2 17:12:50 2014       14015
DDLProc             pm1       ACTIVE            Wed Jul  2 17:12:54 2014       14100
DMLProc             pm1       FAILED            Wed Jul  2 17:13:44 2014       14282
mysqld              pm1       INITIAL
 
ProcessMonitor      pm2       ACTIVE            Wed Jul  2 17:12:04 2014        6979
ProcessManager      pm2       HOT_STANDBY       Wed Jul  2 17:12:05 2014        7044
DBRMControllerNode  pm2       COLD_STANDBY      Wed Jul  2 17:12:24 2014
ServerMonitor       pm2       ACTIVE            Wed Jul  2 17:12:07 2014        7091
DBRMWorkerNode      pm2       ACTIVE            Wed Jul  2 17:12:08 2014        7113
DecomSvr            pm2       ACTIVE            Wed Jul  2 17:12:10 2014        7142
PrimProc            pm2       ACTIVE            Wed Jul  2 17:12:12 2014        7156
ExeMgr              pm2       ACTIVE            Wed Jul  2 17:12:13 2014        7228
WriteEngineServer   pm2       ACTIVE            Wed Jul  2 17:12:14 2014        7251
DDLProc             pm2       COLD_STANDBY      Wed Jul  2 17:12:25 2014
DMLProc             pm2       COLD_STANDBY      Wed Jul  2 17:12:26 2014
mysqld              pm2       INITIAL
 

 

davidhill
davidhill's picture
Offline
Last seen: 21 hours 18 min ago
Joined: Oct 27 2009
Administrator

Posts: 595

david hill
process configuration is incorrect

From the list of Processes shown in the first post, it looks like postConfigue was run once and the single-server install was specified. But then another postConfigure was executed and multi-server was specified the second time though.

This has messed up the ProcessConfig.xml file. To correct this, you will need to reinstall from scatch and start with a clean install.

 

1. erase the installed packages

2. rm -rf /usr/local/Calpont

3. install the InfiniDB packages

4. Then run postConfigure

 

David Hill

xinyu
xinyu's picture
Offline
Last seen: 17 hours 17 min ago
Joined: Jul 1 2014
Junior Boarder

Posts: 13

xinyu zhou
It is working now

Thanks, David. After clean up and re-install, it is working now.

xinyu
xinyu's picture
Offline
Last seen: 17 hours 17 min ago
Joined: Jul 1 2014
Junior Boarder

Posts: 13

xinyu zhou
A new error occured

 

idbmysql

 

ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/usr/local/Calpont/mysql/lib/mysql/mysql.sock' (2)

 

What is the cause of this problem?

radams
radams's picture
Offline
Last seen: 20 hours 2 min ago
Joined: Jan 3 2011
Administrator

Posts: 487

Robert Adams
A new error occured

 

That error is normally an indication that mysqld is not running.

 

Make sure the system is up and active using the calpont console command.

 

# cc getsystemi

 

Thanks,

 

Robert